Serious about racing? More holding power for modified vehicles? This is what you need!
eCLUTCHMASTER® STAGE IV Racing Clutch Kit® is a brand new heavy duty racing pressure plate with 6 puck solid rigid MIBA racing disc setup can hold up to 398 HP, rated 357ft-lb of torque and 90% more pressure increase over stock.
The eCM® Stage IV racing clutch system uses eCM® Stage IV Heavy duty pressure plate with 6 puck solid rigid ceramic MIBA disc. This is ultimate extreme-duty street or road / drag racing system. It is built using a special 6-wing ceramic button design disc for long life, outstanding holding capacity and high heat dissipation. All eCLUTCHMASTER® Racing pressure plates are made from ductile iron (2300 LBS CLAMPING LOAD) which is about 60-70% stronger than conventional cast iron pressure plates other racing clutch manufactures use. It is recommended for use with 'modified' vehicles used for "street and strip". This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications.
It offers 80% more holding capacity than a stock 'OEM' clutch while maintaining a stock pedal feel.
About eCLUTCHMASTER® 6 Puck Solid Racing Disc-
If you want the best the industry has to offer -- Ask for eCLUTCHMASTER® 6 Puck Solid Racing Disc. The eCM® Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced Miba and Ceramic combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the eCM® disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch.
This kit comes with everything you need for a new clutch job or clutch upgrade.
Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!
Features of eCLUTCHMASTER® STAGE IV RACING CLUTCH SYSTEM:
Heavy Duty Stage IV racing pressure plate
Precision heat treated single diaphragm
Re-Arched Diaphragm for Superior Engagement
High clamping force
NO unnecessary increase in pedal pressure
6-Wings Ceramic Button Disc
Solid hub for best holding power
**The throwout bearing and pilot bearing (if required) included ($80 value) for free!