eCLUTCHMASTER® STAGE IV Racing Clutch Kit is a brand new heavy duty racing pressure plate with 6 puck sprung racing disc setup rated
327lb-ft of torque and support up to maximum 345hp
with 80% more pressure increase over stock.
The eClutchmaster® Stage IV racing clutch system uses eClutchmaster® Stage IV Heavy duty pressure plate with 6 puck solid rigid MIBA ceramic racing disc. This is ultimate extreme-duty street or road / drag racing system. It is built using a special 6-wing ceramic button design disc for long life, outstanding holding capacity and high heat dissipation. All eCLUTCHMASTER® Racing pressure plates are made from ductile iron (2000LBS CLAMPING LOAD) which is about 90% stronger than conventional cast iron pressure plates other racing clutch manufactures use.
It is recommended for use with 'modified' vehicles used for "street and strip". This unit has also proven itself to be very capable for four wheel drive and off-road use, also heavy duty towing and commercial applications. It offers 130% more holding capacity than a stock 'OEM' clutch while maintaining a stock pedal feel.
About eCLUTCHMASTER® 6 Puck Solid Rigid Strip MIBA Ceramic Racing Disc-
If you want the best the industry has to offer -- Ask for eCLUTCHMASTER® 6 Puck solid rigid strip Racing Disc. The eClutchmaster® Racing 6 puck strip disc also uses our high torque internal assembly, but goes one step further in terms of friction. This disc uses an advanced MIBA and ceramic combination delivering aggressive bite and increased thermal capacity. Uncharacteristic of the typical aggressive racing disc, the eClutchmaster® Racing 6 puck strip disc provides outstanding stability, smooth engagement, and less wear on opposing plates. This combination has proven to be premier unit with regards to both performance and drivability for the daily driver with serious torque holding requirement. This system is recommended as the finest quality 'upgrade' from the original equipment clutch.
This kit comes with everything you need for a new clutch job or clutch upgrade.
Lastly, resurface and rebalance the flywheel prior to installation for best performance and result!
Features of eCLUTCHMASTER STAGE IV RACING CLUTCH SYSTEM:
Heavy Duty Stage IV racing pressure plate
Precision heat treated single diaphragm
Re-Arched Diaphragm for Superior Engagement
High clamping force
6-Wings Ceramic Miba Button Disc
6 Puck Unsprung disc for drag and track use, more holding power and grip.
**The throwout bearing and pilot bearing (if required) included ($80 value) for free!